TurbiTech D-ISO
A 40-year-old sensor design is used to produce a new sensor that captures stray light to ensure a stable zero point.
A new automatic cleaning device prevents dirt in and around the box, making it a step sign of low turbidity.
It is a very sensitive sensor that can detect changes in turbidity less than 0.01 FTU. Its global standard light scattering technology makes the sensor sensitive to a wider range of particle sizes.
A new automatic cleaning device prevents dirt in and around the box, making it a step sign of low turbidity.
It is a very sensitive sensor that can detect changes in turbidity less than 0.01 FTU. Its global standard light scattering technology makes the sensor sensitive to a wider range of particle sizes.
-
This kind of sensor requires very little maintenance and does not require tools and training. Calibration can be performed according to the wet turbidity standard or using the dry calibration reference battery provided by each sensor. The reference battery provides an extremely simple, repeatable method to check the performance of the sensor without the cost and inherent errors of chemical standards.
-
-
Size259 (W) x 157 (H) x 147 (D) mm
-
Weight0.5KG
-
Protection levelDetector: IP68, maximum depth of 2 m (underwater type) Transmitter: IP65 (jetproof type) Pollution degree 2
-
Housing material封闭材料黑色缩醛共聚物
-
Contact with water1.316 Stainless steel, glass
-
Sealing materialNitrile
-
MaintainAutomatic cleaning, no maintenance. Replace the wiper and desiccant every year (depending on the cleaning cycle setting)
-
Operating temperatur-20 to 70°C
-
Storage temperature-20℃-60℃
-
Cable size5米标准,最大100米
-
Measurement accuracyBetter than +/-2% FSD
-
控件[tem_25_34]渲染出错,Source:未将对象引用设置到对象的实例。