Home
ꄲ
Liquid level, flow rate, mud-water inter
ꄲ
Time difference method external clamp ultrasonic flowmeter TTFM6.1
Time difference method external clamp ultrasonic flowmeter TTFM6.1
Overview
1. The measurement accuracy of the flowmeter is 1% or 0.0046 m/S of the reading, whichever is greater. Repeatability was ± 0.25%
2. It can be applied to full pipe flow measurement, the concentration of gas or solid particles is lower than 2%, and the flow rate range is ± 0.02-12 m/s
3. Can be applied to any metal, plastic and other materials that can conduct sound waves, including but not limited to, carbon steel, stainless steel, ductile iron, cast iron, PVC,PVDF, glass fiber, galvaniz
1. The measurement accuracy of the flowmeter is 1% or 0.0046 m/S of the reading, whichever is greater. Repeatability was ± 0.25%
2. It can be applied to full pipe flow measurement, the concentration of gas or solid particles is lower than 2%, and the flow rate range is ± 0.02-12 m/s
3. Can be applied to any metal, plastic and other materials that can conduct sound waves, including but not limited to, carbon steel, stainless steel, ductile iron, cast iron, PVC,PVDF, glass fiber, galvaniz
-
Optional:
- optional15m/30m the length cable can be extended to through the special junction box.150m
- optional Modbus,RS-485 communication output, output flow, total flow, historical average flow, historical total flow, relay status, signal strength, fluid speed of sound, propagation time, sensor connection status, recorder status, memory usage ratio.
- You can choose to be intrinsically safe1 level,1 zone, group C, D; Level 2, group E, F, G; Level 3; Four types of evil areas.
- Optional 9-32 VDC power input, power less than 10 watts
- can be added 4 sets of control relays, 5 ampere level, can be used for flow alarm or flow accumulation pulse
sensors:
- A pair of outer clamp sensors are used for transmitting and receiving respectively.
- Sensor operating temperature range:-40℃-150℃
- the standard sensor can be applied to the inner diameter of the pipe.50mm-1200mm
- the standard cable length is7.6m
- the manufacturer provides sensor coupling agent, stainless steel mounting bracket and sealant for wet or submerged environment.
- Intrinsic safety is I level,2 district, A, B, C, D group
transmitter
- the transmitter protection level is IP66, Polycarbonate shell, transparent visual observation window, suitable for wall installation.
- The operating temperature range is-20℃-60℃, the power supply of the transmitter is 100-240vac, 60Hz, and the power consumption is less than 10 watts
- by5 A key to calibrate the system.
- Independent4-20mA can output flow value, adjustable range, maximum load1000 ohm, with lightning protection isolation.
- The controller has an electromagnetic noise suppression module, which can filter electromagnetic interference
- with backlight LCD it can display the flow rate, liquid level, flow rate and relay status of the unit selected by the user,14 bit-digit cumulative flow, recorder status, sensor status.
- The transmitter has2 A control relay,5A rank. The relay can output flow through programmed pulses, or as a separate flow rate alarm switch point.
- The transmitter can display and accumulate forward and reverse flow
- the transmitter has built-in128MB data logger, through USB the interface transfers data to an external storage device.
- The circuit part is modular and can be replaced on site and plugged in. Installing option equipment from the site will automatically detect and load the software menu.
Order code:876200
origin: canada
manufacturer: Greyline
-
